👾 ESPHome

2 posts

ESPHome is the perfect solution for creating custom firmware for your DIY projects using ESP8266 and ESP32 boards with simple YAML files.

For just $2, convert any existing wired doorbell into a smart doorbell; using ESPHome and Home Assistant

This article is going to show you how to convert your (existing) wired doorbell (also works for battery-powered chimes) into a smart, WiFi-enabled, doorbell. The essential components needed sets you back about $2, yes, that is correct, just two bucks. No soldering is required and you don’t have to

12 min read

12 gosund wall plugs, plugged into each other making a big stack.

Calibrating an ESPHome flashed power plug

⚠️This blog post is already really old... things changed a lot since then. Just so you know. So you got a power plug or any other device that can measure power, current or the voltage flowing through it. Nice! So did I, and I flashed them with ESPHome since well,

10 min read

Get my newsletter.

Every other Friday, I send a short note about Home Assistant, open source, GitHub, practical AI, and the things that survived real life.

No spam. No growth-hacking nonsense. Just useful thoughts, links, and updates from my corner of the internet.